網友問到的 '耳機音效處理器'

相片如:
http://home.kimo.com.tw/fengchiaopeng/pic/Sound Field EQ.jpg
只有幾個零件,這 module 加在 音量調整 VR (10K ohm) 之後,在耳機驅動器之前 (原來驅動器 音量 VR 移到耳機音效處理器之前 )。
Module 中的二個 藍色方塊 是 relay, 作為耳機音效處理器 enable and by-pass 用,可用一般開關取代。
詳細裝設文章及線路,見 DZ
http://www.diyzone.net/diy/EQ/Grado耳機等化驅動器.html
http://home.kimo.com.tw/fengchiaopeng/pic/Sound Field EQ.jpg
只有幾個零件,這 module 加在 音量調整 VR (10K ohm) 之後,在耳機驅動器之前 (原來驅動器 音量 VR 移到耳機音效處理器之前 )。
Module 中的二個 藍色方塊 是 relay, 作為耳機音效處理器 enable and by-pass 用,可用一般開關取代。
詳細裝設文章及線路,見 DZ
http://www.diyzone.net/diy/EQ/Grado耳機等化驅動器.html